 |
MASS-TER MOVER®
A PORTABLE ALTERNATIVE TO THE BUCKET ELEVATOR
|
 |
|
|
| The MASS-TER MOVER line is Mayrath’s answer to “en masse” conveying systems. You get top performance, long life and reliability with minimum maintenance engineered into each component.
|
- Capacity is up to 5,000 BPH at 45°.
- Long life galvanized housing.
- Conventional models available in lengths of 40’, 50’, 60’, 65’, 70’, 80’, 90’, and 100’.
- Electric or PTO drives available.
- The Conventional MASS-TER MOVER uses a hand brake winch on the 40’ to 65’ units and a hydraulic winch on 70’ to 100’ units.
- Boot inlet includes the standard boot or a side feed boot inlet on the conventional model. (Side feed boot offers a variable inlet height and a larger hopper area.)
- The undercarriage is a scissor-type for greater stability.
- Energy savings of up to 30% can be gained with our unique paddle propulsion system. It does the job using less horsepower than most screw type conveyors.
- High capacity performance comes from the full lower chamber movement of material provided by the continuous chain and paddle conveyance-the en masse concept.
- The unique paddle design allows the portable MASS-TER MOVER to operate up to 45°.
|
|
|
Cutaway drawing shows the chain and paddle in the return chamber.
|
|
|
|
|
|
OPTIONAL SWING-AWAY HOPPER
|
|
Portable Swing-Away Hopper
|
|
|
|
|
Hopper Width
E
M50=34"
M85=43"
|
|
This hopper is also available as a portable unit with a self supporting undercarriage. It is an ideal method of loading portable Mass-ter Movers. Grain Pumps and bucket elevators. The shallow but wide hopper section fits easily under a truck (12” clearance) and allows faster loading into the large portable units. The “swing-away” feature provides convenient access, no backing up to dump into it. Available with electric or hydraulic drive.
|
|
Optional Side Feed Boot Inlet Dimension
|
Standard Boot Inlet Dimension
|
|
MASS-TER MOVER SPECIFICATIONS
|
|
Dimensions of Conveying Chamber
|
6”x 9”
|
|
Capacity (Maximum BPH At 15% Moisture)
|
5,000 BPH |
| Chain Travel FPM |
300 FPM |
| Head Shaft RPM |
126 RPM |
| Gauge of Bottom |
12 Ga. Galv. |
| Gauge of Partition |
12 Ga. Galv |
| Gauge of Top |
14 Ga. Galv. |
| Head & Boot Gauge |
12 Ga. Galv. |
| Paddles |
3/8” UHMW |
| Head Bearing (Shaft) |
2” |
| Boot Bearings (Shaft) |
2” |
| Take-up Location |
Head |
| Discharge |
10” Round |
| Conveyor Chain |
CA557-40’ thru 60’
CA551X-70 thru 100”
|
| Conveyor Sprocket |
19 Tooth |
| Undercarriage |
Tapered Roller Bearings
|
|
|
|
|
|
|
MODEL 50 MASS-TER MOVER
|
|
|
A1
|
A2
|
B
|
C
|
D
|
E
|
F
|
G
|
H
|
J
|
|
40’
|
27'-0”
|
22’-4”
|
13’-0”
|
12’-0”
|
14’-2”
|
12’-8”
|
12’-8”
|
10’-2”
|
8’-2”
|
12’-6”
|
|
50’
|
43’-0”
|
27’-1”
|
16’-5”
|
15’-1”
|
17’-8”
|
15’-11”
|
16’-7”
|
13’-1”
|
8’-1”
|
14’-7”
|
|
60’
|
40’-7”
|
32’-6”
|
22’-10”
|
22’-2”
|
18’-0”
|
16’-6 1/2”
|
17’-0”
|
14’-2”
|
8’-9”
|
15’0”
|
|
65’
|
44’-1”
|
35’-4”
|
23'-9”
|
22’-10”
|
20’-11”
|
16’-6 1/2”
|
20’-0”
|
17’-0”
|
8’-9”
|
16’-0”
|
|
70’
|
43’-1”
|
38’-3”
|
28’-4”
|
26’-6”
|
21’-3”
|
18’-5”
|
20’-3 1/2”
|
16’-0”
|
10’-11”
|
15’-2”
|
|
80’
|
49’-6”
|
43’-11”
|
32’-5”
|
31’-6”
|
23’-4”
|
20’-6 1/2”
|
22’-5”
|
18’-8 1/2”
|
11’-11”
|
17’-2”
|
|
90’
|
55’-11”
|
49’-8”
|
35’-3”
|
34’-9”
|
26’-6”
|
22’-3 1/2”
|
24’-8”
|
21’-11 1/4”
|
14’-3”
|
17’-6”
|
|
100’
|
62’-4”
|
55’-5”
|
41’-10”
|
42’-4”
|
27’-6”
|
26’-10”
|
26’-4”
|
22’-5”
|
14’-3”
|
21’-1”
|
|
A1. Maximum discharge height (Approx. 45°)
A2. Discharge height at 35°
B. Closest point to bin at 35° (Ground level)
C. Closest point to bin at 35° Eave level)
D. Free clearance above wheels
E. Intake to lower arm attachment
F. Upper undercarriage arm length
G. Lower undercarriage arm length
H. Tread width center of tire
J*. Overall height in transport
*Transport height will be lower when attached to drawbar of towing vehicle.
|
|
|
 |
|
|
|
|
|
|
|
|
© 2005 Hutchinson/Mayrath
